And tell me how proud of it you are.

    • IninewCrow@lemmy.ca
      link
      fedilink
      English
      arrow-up
      49
      arrow-down
      1
      ·
      1 year ago

      Seriously? No upgrades, augments, removals or additions?

      I’m 45 and I don’t think my knees or hips will last that long. And my memory will probably degrade over the next twenty years.

  • cynar@lemmy.world
    link
    fedilink
    English
    arrow-up
    116
    ·
    1 year ago

    I’ve got a Miele washing machine that’s the best part of 40 years old. It’s required some maintenance over the years. However, it was designed with maintenance in mind, so all the repairs have been fairly painless.

    My 5 year old dishwasher, on the other hand, has cost me more time, money and stress than the (very overworked) washing machine.

    • 9point6@lemmy.world
      link
      fedilink
      arrow-up
      51
      ·
      1 year ago

      Miele shit just continues to exist inexplicably. Literally unbreakable (permanently). And according to what I’ve read, at least, their modern stuff has not dropped in quality

      I honestly can’t think of any brands that have anything close to that longevity

      • cynar@lemmy.world
        link
        fedilink
        English
        arrow-up
        60
        arrow-down
        1
        ·
        1 year ago

        It’s the little things that count.

        • The drain pump is just 3 bolts to take off (pump came back to life after I tipped it. The new one is still sat in the cupboard a decade later).

        • The electronics are mounted on their own door. They swing out, and are VERY easy to service.

        • The wiring diagram was in a plastic wallet inside the machine.

        • The shocks are easy to access and come off with an M10 spanner and are easy access.

        Those are just the ones that have noticed explicitly, the whole machine was built with that mentality.

      • veng@lemmy.world
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        I used a Miele hoover as a shop vac, hoovering wall plaster, muck and sawdust etc and pretty much abused it - replaced all filters and gave it a good clean and it still works like new. That was 5 years ago and it’s still going fine.

    • Ghostalmedia@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      arrow-down
      20
      ·
      1 year ago

      IMHO, if a dishwasher isn’t under warranty, and it’s a mechanical or electrical issue, you might just want to replace it. The cost of technician and parts can add up, and a new machine with a good reviews is only around $500 usd.

      • It’s a bit crappy that manufacturers have managed to essentially force us into a subscription for our home appliances, by making self repair uneconomical and expensive, almost guaranteeing a replacement every 4-5 years.

        The repair contract on my washing machine is about to run out, and that thing has been serviced many times at this point. Once for a blown mainboard, burnt out motor, and other miscellaneous issues that some of the techs haven’t been able to identify, having to return again with more bits.

        At least I have a spare mainboard now and the last tech fitted a brand new motor, which is way quieter than the horrifically loud original one

        • Ghostalmedia@lemmy.world
          link
          fedilink
          English
          arrow-up
          8
          ·
          1 year ago

          Agreed. IMHO, Bosch has a pretty good track record for dishwashers. Those things usually last a good long while.

      • cynar@lemmy.world
        link
        fedilink
        English
        arrow-up
        19
        ·
        1 year ago

        It’s fixed now. It was a 10p sensor embedded in a £65 piece of plastic. The error message had me barking up the wrong tree. It’s fixed now, at least.

        I dislike being wasteful. When my last TV died, while I replaced it, I then fixed it, and gave it to a friend. £10 backlight, and an hour or so of effort.

      • Carighan Maconar@lemmy.world
        link
        fedilink
        arrow-up
        5
        ·
        1 year ago

        Why? Mine went error 17, that’s water in the bottom, turns out the seals had become damaged over the years. 1€ replacement part, 25 Minutes of time and a YouTube video and the thing has been running for 3 years as of now, again (total age 12 years).

  • mateomaui@reddthat.com
    link
    fedilink
    English
    arrow-up
    90
    arrow-down
    2
    ·
    1 year ago

    My original NES and game cartridges. Still work great, although retired as collectibles in favor of emulators now.

    • Snot Flickerman@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      42
      ·
      1 year ago

      I got lucky with mine. I started having issues with mine around 2000. I lived in Washington, only like an hour from Nintendo of America. At the time, Nintendo still serviced all their old consoles up to and including their current consoles. (This would change in 2006, with the Wii, when they started releasing old games digitally, it was game-over for their long-term servicing of old consoles.) So I took mine in, and if I recall correctly, it was about $50 to get all my games professionally cleaned and for the console to be cleaned, fixed, and sent home with new power supply and controllers.

      It’s been a champ ever since.

      • mateomaui@reddthat.com
        link
        fedilink
        English
        arrow-up
        16
        ·
        1 year ago

        I wish I had known about that. The cleaning accessories I’ve found over the years have kept it going without issues, but I definitely would have sent mine in for a preventative professional cleaning and refurbishing if they found anything wrong with it.

        • Snot Flickerman@lemmy.blahaj.zone
          link
          fedilink
          English
          arrow-up
          6
          ·
          1 year ago

          I remember being a bit surprised when I found out about it, but it also seems to be that a lot of people didn’t know about this service, despite it being something Nintendo seemed to pride themselves in for a long time. Maybe they just didn’t publicize it widely enough?

          • mateomaui@reddthat.com
            link
            fedilink
            English
            arrow-up
            8
            ·
            1 year ago

            I never heard anything about it. I definitely would have sent in the NES, SNES, and N64 for servicing if it was on my radar.

    • Neat.

      I have a hand-me-down NES from a relative that sadly passed away, console works a treat but at some point within the past decade the cartridge batteries went flat. Finally have the gamebit driver to replace them but the gear is all packed away at the back of my storage cupboard…

      • Refurbished Refurbisher@lemmy.sdf.org
        link
        fedilink
        arrow-up
        3
        ·
        edit-2
        1 year ago

        Could always do the melted pen trick (outside; burning plastic is not good for you). Could risk melting the game cart plastic, though if you get the pen too hot.

  • Saigonauticon@voltage.vn
    link
    fedilink
    English
    arrow-up
    72
    arrow-down
    2
    ·
    1 year ago

    A pocketwatch manufactured in 1889. I keep it running as a memento mori: the watch may outlive the watchmaker. Build things well – they may be all people remember you by, one day.

    I also have a slide rule at my desk at most times, to remind me of false-precision.

    I guess the oldest though, is a Wu Zhu coin from the Three Kingdoms period (currency is a technology, too?). I keep it to remember that all empires arise from chaos, and must return to it; that all assets eventually have no value. That the things that endure, are stranger currencies still.

    • AlolanYoda@mander.xyz
      link
      fedilink
      arrow-up
      11
      ·
      1 year ago

      You’re the badass stoich character from fantasy stories!

      “I keep the relics of my ancestors to remind me we all die”

    • wellDuuh@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      A pocketwatch manufactured in 1889. I keep it running as a memento mori:

      And to think I almost typed in my Lumia 1020… 🤣 🤣 Hats off mate!

      • Saigonauticon@voltage.vn
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        If you happen to want one, they are surprisingly affordable (I think I paid ~100$). So many were made, for so many years, that they are not exactly rare! Some antiques are fun like that.

  • ArxCyberwolf@lemmy.ca
    link
    fedilink
    arrow-up
    63
    ·
    edit-2
    11 months ago

    A 1940s era Sterling Siren Model “F” factory siren. This siren spent decades outside of a Long Island, NY firehouse, acting as a street clearing siren to allow fire engines to exit the station unimpeded during an emergency. It was decommissioned a few years ago and popped up on eBay, and I was able to get ahold of it for cheap as the seller didn’t know its worth. Model F sirens are very hard to find, as they haven’t been made since the 1960s, and the need for street clearing and fire sirens have lessened with the advent of pagers. I believe there are less than a dozen left in service across North America.

    Mine is in very good running shape, despite its age. I lubricated the bearings recently (brass sleeve bearings) and let the motor break in. It isn’t quite as loud as my Federal Sign & Signal Model “L” (built in the 1960s) but still packs a punch. I usually set them off with the city sirens every Monday. It does need cosmetic restoration, as the paint is badly weathered and the projector has some dents in it, but it won’t be hard to fix up.

    https://youtu.be/KvsGiL15g1k?si=ZgheNIH-fqOHJXnJ

    My Model L is on the left, and my Model F is on the right.

      • Flying Squid@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        That was common in the town where I grew up. The sirens were used as tornado warnings, so they made sure they were in good working order.

      • Trainguyrom@reddthat.com
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        It’s relatively common in small towns. Some towns with volunteer fire departments will have a siren they use both to call all available volunteer firefighters and to announce the need to shelter for a tornado. They used to sound it at noon every day and my wife (then girlfriend) used it as an alarm clock when she worked 2nd shift anytime she slept in too late

        About 5 years ago they stopped sounding it at noon, and honestly I’m not sure when the last time i heard the sirens was since tornadic storms are becomes much less common here and the firefighters have become increasingly reliant on their radios instead. I kinda miss it. There’s a quaintness to just listening for the noon whistle to tell time

        • ArxCyberwolf@lemmy.ca
          link
          fedilink
          arrow-up
          3
          ·
          1 year ago

          It’s very common even today for fire sirens to still be in use, as well as noon whistles. Unfortunately, people complain about the noise despite choosing to live near the fire department, and the sirens get shut off.

          • ArxCyberwolf@lemmy.ca
            link
            fedilink
            arrow-up
            1
            ·
            edit-2
            11 months ago

            Canada. It’s not really a thing in the UK. Fire sirens/noon whistles are mostly a North American/European thing.

  • roscoe@startrek.website
    link
    fedilink
    arrow-up
    59
    ·
    1 year ago

    My paternal grandmother’s KitchenAid model K mixer she bought just after my grandfather returned from WW2. She gave it to my mother in the late 70’s because she wanted a new one and the damn thing showed no signs of dying. My mother gave it to my wife about 15 years ago for the same reason.

    We’ve bought some new accessories but that fucking zombie mixer will outlast the roaches.

  • pixelscript@lemmy.ml
    link
    fedilink
    English
    arrow-up
    46
    ·
    1 year ago

    I still listen to my music using a 160 GB iPod Classic. Apple struck gold with that clickwheel. Carrying around a dedicated device for music just for that elegant one-thumb control I don’t even have to look at to use is still totally worth it to me.

  • TIMMAY@lemmy.world
    link
    fedilink
    arrow-up
    42
    arrow-down
    1
    ·
    1 year ago

    I am the oldest piece of working hardware I own and I am constantly disappointed by it

  • Shanedino@lemmy.world
    link
    fedilink
    arrow-up
    40
    ·
    1 year ago

    You probably mean electronic not technology. But I have a mechanical singer sewing machine from the 1800s that’s still in working order.

  • DahGangalang@infosec.pub
    link
    fedilink
    arrow-up
    37
    ·
    edit-2
    1 year ago

    Not at all impressive, but to maximize interactions on a newborn thread:

    It’s probably my PS3, which I would have gotten Christmas 2008 (or maybe it was 2009?). I recently started sailining the seas, and the most convenient way to watch those videos is to burn them to a disk, and so the PS3 is really just a glorified DVD player (can’t even be bothered to use it’s blue ray functionality)

    • mommykink@lemmy.world
      link
      fedilink
      arrow-up
      12
      ·
      1 year ago

      Hey, keeping a first gen PS3 running after all those years is more impressive than you might think. Wayyy too many of those cooked themselves on 12+ hr gaming sessions back in the day

    • Evkob@lemmy.ca
      link
      fedilink
      arrow-up
      5
      ·
      1 year ago

      Similarly, my PS2 which I got for Christmas in 2003 is still running strong, I replayed Simpsons Hit & Run recently and it the console plays as well as it did when I first booted up.

      It also has the honour of being the last device I own capable of playing DVDs since my PC’s optical disc drive died.

      • nilloc@discuss.tchncs.de
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Our wii is still hanging in there, though there DVD drive doesn’t like to fully latch and I have to keep the side cover loose too hello it Fully load.

        But I also have a working PS2, PS1 with GameShark that can load pirated games. And a battery working finicky NES.

  • kent_eh@lemmy.ca
    link
    fedilink
    English
    arrow-up
    35
    ·
    1 year ago

    I have my grandparents gramophone.

    We pull it out each year to listen to their old Christmas records.

    It’s become a tradition that my university age kids still look forward to.

  • rmuk@feddit.uk
    link
    fedilink
    English
    arrow-up
    35
    arrow-down
    1
    ·
    1 year ago

    I have a General Post Office model 711 telephone. I installed a microcontroller into it and it’s now the keypad for my home alarm system. It’s also hooked into Home Assistant so I could have it for other things if I wanted.

  • DaCrazyJamez@sh.itjust.works
    link
    fedilink
    arrow-up
    31
    arrow-down
    1
    ·
    1 year ago

    Depending on what you consider technology:

    I have several firearms well over 100 years old in perfectly operational condition.

    Quite a few kitchen appliances from the 70s that will never die.

    And a working Apple IIgs.

    As far as use on a daily or near daily basis, I have a 1974 Fender guitar amp, and a few other speakers and musical instruments that are vintage that are also going to outlive me.

    • merc@sh.itjust.works
      link
      fedilink
      arrow-up
      7
      ·
      1 year ago

      What’s amazing to me is that for guitars / basses, even amps, the value often goes up for the truly old stuff. Even (sometimes especially) if there’s visible wear and tear. The bass I own was one I bought new, so it’s only about 15 years old. But, I was just curious the other day so I was searching for basses on Ebay, and they’re selling basses that are $50k and are 40+ years old.

  • owenfromcanada@lemmy.world
    link
    fedilink
    English
    arrow-up
    31
    arrow-down
    2
    ·
    1 year ago

    Polaroid Land camera, ~1950. Found it after my grandparents passed. Never tried using it, it’s just neat.

    • Lenny@lemmy.world
      link
      fedilink
      arrow-up
      15
      ·
      1 year ago

      They’re a lot of fun if you can get the film. Some company reverse engineered it and then went out of business, but I think there are still options if you’re willing to pay $2 a photo.

        • Lenny@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          Ohhh really? I have one too, figured it was just a neat decoration on my camera shelf now. Maybe I’ll dust it off and use it again!

        • Guster@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          There’s a neat video showcase of their process/factory on YouTube. Forgot which channel made it but think something like veritasium/sed

          • Devdogg@lemmy.ml
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            They actually made a LEGO Polaroid camera. Should be coming out next year?

    • limelight79@lemm.ee
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      I have a Kodak Brownie here somewhere. I’ve never tried using it, but it should work - the shutter spring is in place and functional. The mirror for the viewfinder is messed up, too, so I might not be able to frame the shot correctly either.