The few times I’ve needed to man [app name] on a system without internet access or on an obscure utility, I’ve always been able to find what I need in the included docs

I hope the dev eventually gets sponsored, this is one of those utilities that you don’t think you need until --help doesn’t cut it

I use OSMand alongside GMaps WV (a webview for Google Maps, wipes all data automatically after closing). Works well enough for me, but in GMaps you can’t rotate the map or provide your location

I use “Automation” (on fdroid) - the UX could do with some improving but it thoroughly covers the basics.

Newer versions of Android make it difficult to automate certain things though, I find root helps to get around that in some cases

I was looking for Sleep As Android too!! Separately to this I saw a comment on R a while ago asking for FOSS alternatives, and to say the dev’s response was out-of-touch would be an understatement. They just complained about not being able to make a living from a FOSS app…

Regarding Gadgetbridge though, those devs and contributors are running into more and more accessories using encrypted protocols which is a bit worrying. Right now I’ve settled on the BangleJS which has official support, just wish it had a more accurate heart rate sensor!

My dream FOSS health app would be some concoction of OpenScale and Gadgetbridge 😂

I have to admit I’m not entirely convinced these requests are coming from a compiler…

Is it possible for you to virtualize an non-networked system with your GPU passed through? That seems like the best option IMO. Next best thing would be to set up an airgapped machine just for this, but not everyone has a 2nd machine.

Personally when I was trying out local LLMs I used a virtual machine, mainly due to the known code execution vulnerability related to Tensorflow model data being saved in python’s Pickle format. I believe the recommended save method changed twice since those days though.

With the Firefox stuff I’m assuming you’ve also checked their enterprise config options too (which are admittedly difficult to find and piece together online), so not too sure what else you could do except aside from continuing to block them. Librewolf however provides documentation on how to disable the extra requests sent from their browser in their FAQ, and covers some preferences on the subsequent page linked at the bottom

Nothing concerning for me here personally. However, if you have an issue with Firefox’s ‘QoL’ features dependent on Mozilla infrastructure, you could consider Librewolf instead as an alternative.

As for the reverse lookup requests, those are targeting local multicast addresses on your internal network, except the last one which is for the Fastly CDN service

Haven’t watched the video - just my thoughts…

Minetest (specifically Mineclone2) is an impressive feat, and a very faithful reproduction of the original. I pretty much used the Minecraft fandom wiki to progress through the game. Hours of fun was had without handing money to M$.

I only really stopped because the redstone functionality wasn’t fully implemented.

Hats off to the devs on that project regardless

AFAIK on Windows the physical disk containing the partition needs to be marked offline in Disk Management, and the disk or a partition given exclusively to VirtualBox running as administrator, otherwise access is limited to read-only

I would suggest checking some other sources as well, just in case this has changed over the years. If you do successfully pass the physical partition into VirtualBox read-write, you might need to set up a virtual disk with grub to boot into your physical Linux partition

Nope, NewPipe and Tubular are separate projects

NewPipe is more vanilla, primarily focusing on the ability to watch videos without signing into an account.

Tubular takes this a step further, integrating Sponsorblock and RYD. More recently the ability to view full comment threads was added, and the dev has plans to allow sign-in to bypass the more agressive bot checks that YT has been putting in place recently

Windows 7 being discontinued.

I migrated my HTPC to Linux several years ago, and since then just transitioned more and more of my machines over.

My desktop is the only machine left running Windows at this point due to there being no Freetrack implementation on Linux for sim games

I’m rooted to…

• backup & restore my apps as I please (as well as scheduled backups to my SD card)
• BMS control to keep my battery in good health
• Automation app for automating stuff (like Tasker)
• revoking typically unrevokable permissions from system and Google apps
• To actually feel like I own my device.

If I wanted a heavily curated (and somewhat locked down) experience, I’d be in the Apple ecosystem - don’t know why Google thinks it’s a great idea to force this ideology onto practically all Android users…

Similar situation with that additional warning for sideloading apps - there’s already two warnings and Play Protect typically uninstalls these apps anyway, without the user’s consent - in one case deleting KDE Connect from users’ devices if installed with F-Droid

Uhh I definitely went off on a tangent, oops.

That sounds horrible, literally couldn’t own anything nice without it getting stolen and your personal space getting trashed…

In my city? Really great, since people ride a fair bit here and there’s a lot of protected and off-road routes that are correctly labelled. I have my settings set to choose a slightly longer route, instead of just the fastest. If I remember correctly, there were also settings for whether on/off road directions are preferred. I’m pretty much kept on bike paths all the time

I don’t use navigation in the areas with cobblestone paths here though so can’t comment on that.

For the bike map view I’ve enabled the clock widget, speed widget, and track recorder widget, as well as a shortcut to quickly toggle it on. I set it up about 2 years ago when my bicycle computer was stolen, haven’t changed anything since.

Download it from F-Droid store instead, the Play Store option only exists for funding AFAIK

To answer the direct question - no

I do have some thoughts on moving away from the Pi though - warning, heavy personal bias ahead…

If you’re looking at moving away from the Pi I would just suggest a low power x86 box, like a Nuc or some Intel N100 low-power tiny PC.

There is a caveat though - it looks like the OctoPi project only provides OS builds for the Pi, so if you change systems it looks like you’ll need to install OctoPrint manually, and port over your config somehow.

On ebay you can get second-hand NUCs, 6th gen and up, for practically peanuts. The cheaper quad core celeron nucs (i.e. J3455) are roughly equivalent to the 3rd and 4th gen dual-core i5s (3777u, 3230m etc) performance wise, but have an updated QuickSync encoder and support accelerated 4K video encoding/playback, handy if you want to capture timelapses of your prints or just view them live. They also consume 1/3rd of the power at around 10 watts under the same workload.

ARM support for other vendors can be pretty flaky, sometimes even non existent. While you could pick an Orange Pi, and go with a modern community-supported distro like Armbian, it isn’t a turnkey experience like the Pi. There is much less documentation, and still some very early boards floating around with hardware defects and overheating issues (posing a fire risk in the worst case, the OPi Zero being the most egregious - literally melting the optional enclosure and killing the NIC). Some research before buying will let you know most of what you need to know - check around the forums for any common issues and dealbreakers, as well as the manufacturer’s site to get an idea of available support.

If you want to get an idea of the alternatives you could check out Jeff Geerling’s youtube channel, he covers the Pi and occasionally videos on other alternatives, as well as issues he’s had with them and support. I’ll try and link some below…

https://www.youtube.com/watch?v=KghZIgkKZcs

Check the comments on that one for a quick synopsis, as the video is quite long…

https://www.youtube.com/watch?v=jjzvh-bfV-E

This video pretty much just echoes my current perspective

To combine a bunch of explanations I’ve seen in the comments here:

A bourgeois philanthropist game show producer who dabbles in poverty porn.

That said, I do occasionally burn time watching some of his videos, however some of the content (especially the more recent game show ones which feel a bit like toying with people) rub me the wrong way.

I have no idea if his philanthropy efforts are genuine or not - he’s barely visible in those videos (he has another individual hosting those videos) although I do appreciate the efforts they appear to go to when assisting communities desperately in need, and careful implementation of solutions that are sustainable, and can actually be maintained and fixed with local knowledge.

I’ve seen way too many “gimmicky” charity contributions by other organizations that become worthless as soon as they break because nobody fixes them, as well as other solutions that seemingly make sense from a western cultural lens but aren’t really understood by the local people… worst one being a “merry-go-round” water pump mechanism where senior locals are forced to “play” just to pump water for survival. It was originally intended as a kids toy, but they of course don’t have any attachment to such a foreign device, thus don’t use it.

Ehhh apologies for the mini rant there 😅

Curious about this one too

The Grayjay app includes an entire development environment for plugins.

No idea why the keyboard app is “large”. Could it be for support on obsolete Android devices where they’ve needed to re-implement missing APIs and features entirely themselves (like Firefox/Fennec and the Share menu)?

They could also be using completely different local AI tooling, or a custom trained model that has a higher space footprint compared to other similar apps. As always the true answer lies in the available code…

Edit: Grayjay’s = The Grayjay

Retraction settings are probably your best bet then. Since the SV06 doesn’t use a bowden extruder, there’s much less things that could be the issue in your scenario thankfully

To be specific about my “workaround”, it compensates for a non-flat build plate (ramped lift) and a cheap nozzle that filament often sticks to (wipe on retract). It took me two days of test prints and research to narrow those down though…

To get to the bottom of your issue quickly, you could try tuning your retraction using a retraction test, then possibly try recording the nozzle printing the same test at 60/120fps, to play it back in slow motion. This way you can see at what part of the nozzle movement the stringing starts, and change any relevant settings accordingly

Are you printing with PLA or PETG?

I dealt with my stringing issue by enabling “Wipe-on-retract”, and “ramped lift”, allowing any oozing material from the nozzle after retraction to get wiped off.

Dialed in slicer settings for PLA first since it’s usually an easier material to print with, then changed a few things for PETG, like increasing the travel speed to break the stringing faster.