Yes, I think Alpine is very good for this purpose because it is very lightweight. Otherwise you can try Debian CLI

Everything is fine. It’s always nice to learn something new. Hope you will have better week!

Also systemd says I am using initrd (on my Fedora machine)

systemd[1]: Running in initrd.

But I have initramfs packed with dracut in /boot folder

/boot/initramfs-6.12.8-200.fc41.x86_64.img

Yes, seems like Devuan also use update-initramfs (discussion link) as expected. So I think process will be similar to upstream Debian.

Based on first result

We can use initrd for Linux kernels 2.4 and lower. Conversely, initramfs is for kernels 2.6 and above.

Since on all modern system initial filesystem is tmpfs sometimes it is confused and initramfs is called initrd (for example: in grub to load initramfs you use initrd command).

If so what is the difference?

AFAIK initramfs is the same thing as initrd. But do you have update-initramfs command available?

Yes. But if you really need it, it works great under wine.

Wine as Windows layer has small registry for Windows apps

You can use regedit on Linux via wine!

This

I maybe need to correct my post. I am talking about system utilities like Device Manager or something else.

What is your DE? On KDE Plasma Wayland you can just use kscreen-doctor output.HDMI-A-1.scale.2 to set it to 200%

And it seem like CLI not GUI issue :)

In Windows 10 there should be “Join domain instead” button. Click it and enter your new username

Grub customizer can do much more and was made a lot time ago

deleted by creator

deleted by creator

I think the best way is using live debian image with Wayland cage. User can change something, but it will be lost on restart. Debian supports plymouth out-of-the-box if enabled in grub.

This is server config

$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet [REDACTED]/32 scope global lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether [REDACTED] brd ff:ff:ff:ff:ff:ff
    inet [REDACTED]/30 brd [REDACTED] scope global dynamic enp6s0
       valid_lft 327sec preferred_lft 327sec
    inet6 fe80::8e0:afff:feae:17cf/64 scope link 
       valid_lft forever preferred_lft forever
3: wlp5s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether [REDACTED] brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.1/24 brd 192.168.0.255 scope global wlp5s0
       valid_lft forever preferred_lft forever
    inet6 fe80::1291:d1ff:fe5a:2af8/64 scope link 
       valid_lft forever preferred_lft forever
4: virbr1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
    link/ether 52:54:00:cf:c8:59 brd ff:ff:ff:ff:ff:ff
    inet 192.168.2.1/24 brd 192.168.2.255 scope global virbr1
       valid_lft forever preferred_lft forever
5: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 52:54:00:bb:da:14 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.1/24 brd 192.168.1.255 scope global virbr0
       valid_lft forever preferred_lft forever
6: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master virbr0 state UNKNOWN group default qlen 1000
    link/ether fe:54:00:ec:b8:55 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::fc54:ff:feec:b855/64 scope link 
       valid_lft forever preferred_lft forever
7: wg0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN group default qlen 1000
    link/none 
    inet 10.0.1.1/24 scope global wg0
       valid_lft forever preferred_lft forever

# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         [REDACTED]    0.0.0.0         UG    0      0        0 enp6s0
10.0.1.0        0.0.0.0         255.255.255.0   U     0      0        0 wg0
[REDACTED]    0.0.0.0         255.255.255.252 U     0      0        0 enp6s0
192.168.0.0     0.0.0.0         255.255.255.0   U     0      0        0 wlp5s0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 virbr0
192.168.2.0     0.0.0.0         255.255.255.0   U     0      0        0 virbr1

# iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         
# iptables -L -t nat
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination         

Chain INPUT (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         

Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination         
MASQUERADE  all  --  anywhere             anywhere