If you want to be able to trim off the ends, I suggest a double fisherman’s instead (aka the double overhand stopper) with both strands (hold them together while you tie and treat them as a single strand).
https://www.animatedknots.com/double-overhand-stopper-knot
With either knot, after you trim, you can melt the ends of the elastic cord. It will “mushroom” a bit, which will also prevent the tips from creeping into the knot and coming loose.
A flat overhand bend in the elastic cord is what I recommend: https://www.animatedknots.com/flat-overhand-bend-knot
Justification:
Simple, not bulky, reasonably secure against shaking loose, and relatively easy to untie.
As suggested in another comment, a double figure eight could be used as well. It will be more bulky and a bit less likely to come loose.
I think we’re saying the same thing?
You have your end grain slab laid on a table in front of you. From left to right divide cut it into parallel pieces (width of these is up to you 2" or 3" is probably fine). With them all laid on the table on their original pattern, rotate or flip alternating slices. Glue it up.
The bigger the wood the more movement it will have. End grain boards like you describe often have their pieces oriented in opposing directions to manage the warping due to expansion and contraction. Plus the more pieces the more glue jointing holding it together.
To provide more stability, you could cut a series of slices and flip every other one such that the curve of the grain is alternating.
If you’re using Sync there’s an option called “filter user”. Post dot menu / filter / user.
The addAddress call may just be configuring the local side of the VPN. It’s hard to know without looking at the rest of the code.
The general workflow when establishing a VPN connection is:
addAddress may just be part of the configuration. A very cursory search suggests that OpenVPN may be being used as the underlying VPN implementation framework (not uncommon).
5:1 (mineral oil:wax)
To add to the above comment, this is effectively what’s sold as “cutting board wax/oil”.
Paraffin, soy or bees wax would all be fine. In my experience buying bees wax flakes is the cheapest way to get bees wax, it’s often sold for use in cosmetics.
The Internet’s Own Boy: The Story of Aaron Swartz https://www.youtube.com/watch?v=3Q6Fzbgs_Lg
Aaron created RSS, and was an early developer of Reddit. A visionary of accessible information and information technology.
Since his death, the direction the internet has gone has been in ways that he would very much be taking issue with.
The simple answer is yes.
It’s possible to encode or tunnel anything over any protocol.
The next question is why isn’t it done more?
For the above reasons it’s actually more common to see other protocols run on top of http. This is especially common to prevent blocking and censorship by making the traffic look like normal http traffic when it may actually be private messaging apps, file transfers, VPN, etc.