Did you notice a difference in print speed when you slowed down? As this is a small print, it could already be as slow as it will be due to minimum layer times.
It could also be that the nozzle spends too much close to the print. What happens if you print 2 or 3 of them?
This is typically more of an issue with PC where you don’t have a part cooling fan running, but maybe it’s the case here too?
Interesting that the extra 10° makes such a difference for ASA and ABS.
I recently started printing with ASA in my enclosed MK4. I might have to try this.
First sentence on the first hit when searching for “Gmail smtp imap”:
For non-Gmail clients, Gmail supports the standard IMAP, POP, and SMTP protocols.
https://developers.google.com/gmail/imap/imap-smtp
What you’re referring to is the fact that GMail has apparently disabled authentication using username + password for SMTP/IMAP. I would assume that application passwords still work fine as a workaround, even if they don’t mention it specifically.
Okay, fairy nuff.
In that case, I would probably start with writing an SMTP or IMAP proxy first. It will teach you everything you need to know about the protocols, and you can reverse engineer the protocols using a client that already works.
It would give you a tangible project outline, which I believe is often critical to not lose motivation or interest.
If you accept using libraries, there’s the imap crate, the mail_send crate, and samotoo crate that are worth looking at.
I think you’re misguided about the APIs. Gmail supports IMAP and SMTP. Proton supports those too if you run an encryption bridge on your computer. Fastmail supports IMAP/JMAP/SMTP (they invented JMAP to try and innovate).
Email providers most likely must provide SMTP and IMAP due to compatibility requirements with Apple Mail and other clients.
Email is ridiculously complex—the technology is dead simple, but the number of exceptions and (undocumented) rules you need to abide by or risk getting banned by half the internet without being told is nothing to sneeze at.
I should know: I have built multiple support platforms that worked through email (amongst other channels).
You mention wanting to start at the SMTP level, and then building a Qt interface. So you’re going to write an SMTP client, an IMAP/POP3/JMAP client, a storage engine, a user interface, and a better search system, all on your own? You’re describing a gargantuan task.
No offense, but each one of those could be a project on its own. You probably think they’re all simple tasks (they’re not), and that you can follow a few RFCs to get things going (you can’t), and that it’ll be easy to debug (it won’t). Finally, I think you’re underestimating how large people’s email maps get.
Why not write a plugin for Thunderbird that improves the search?
Could you explain what you mean by “full commercial use”?
I would model the part myself, print it myself and check for fit and function. Once the part design and tolerances confirmed, I would then either use a local or remote shop.
Xometry.eu (no affiliation, never used them) appears to be in Europe and outsources to local shops. They have plastic and metal SLS, CNC, sheet metal, and everything else as possibilities. https://xometry.eu/en/direct-metal-laser-sintering/
Another option is to use the Chinese PCB shops. PCBWay has amazing abilities these days: https://www.pcbway.com/rapid-prototyping/manufacture/?type=3&reffercode=TOP
Had this happen to me as well this week after a few months of not using Fusion 360.
Turns out it’s a software update issue. Just close the app every time it fails, and eventually it will manage to update. I have an insanely fast internet connection, so maybe you need to keep it open for a while to download the updates.
It could be a case of too much cooling, while simultaneously being too much heat.
If you’re blowing so much air that the filament instantly solidifies when it leaves the nozzle, it’s not going to bond with anything else. It’s also interesting that the first layers are fine (when the part cooling fan is typically not running), but problems start when the part cooling fan turns on.
Have you tried without part cooling at all? Another thing is that your part cooling might be cooling down the tip of the nozzle, causing tiny partial clogs, which are cleared every so often by friction.