See I think that’s not what the “anti-woke” people think it means.

That’s exactly what I pointed out. The people who provide them their information are actively trying to poison the word to the point that it means something else. But it doesn’t, because the poisoning only works in the echo chambers that spread that information.

Turning to urban dictionary, they’re using this definition: […]

That would be one of the attempts to poison the word. It’s worth pointing out that anyone can add a definition to urban dictionary and it’s quite often that trolls try to overwhelm existing definitions on there.

[…] (according to that definition).

That comes back to what I said before. People who self report as anti-woke are against anything that uses the label “woke”, until they look at what’s under the label and they realise they aren’t against any of the points the “woke” labelled thing is doing.

They’re not actually anti-woke, they’re anti-incorrect-label.

Because being woke is generally considered to be a bad thing?

No. Being woke is only considered bad in toxic echo chambers where they’ve tried to poison the word.

Most people who self report as “anti-woke” repeat infectious and carefully crafted but fallacious talking points whenever the term “woke” is said.

But if you bring up a situation where a minority is getting the bad end of the stick and they agree with you that it’s bad, they don’t realise that they themselves are being woke. They agree with being woke so long as the label “woke” isn’t used. It’s when you point that out that they start to realise that they’ve been poisoned against the term.

Being woke simply means that some people don’t often get the same affordances as others.

If you accept the general fact that women tend to get paid less for the same amount of work, then you’re woke.

If you accept the general fact that black people might not get hired if a person doing the hiring is racist, then you’re woke.

If you accept the general fact that some people have to hide the fact that they’re not heterosexual in some countries otherwise they’ll suffer the death penalty, then you’re woke.

English doesn’t really have a well defined way to write down the “zjush” from the “su” in pleasure.

The most accepted ways are “zh” or “x” in English, or ʒ in IPA.

Since most people call it twitter, and Elon want to call it x, so people push them together to make xitter, because it sounds like “shitter” (the crude term for toilet) and because the quality of twitter has declined dramatically to the point that it resembles an unclean toilet.

This doesn’t seem overly useful.

It’s a list taken out of a bunch of books with no regard for how something can be the best path in one language and a smell in another language.

Look at this page for example: https://luzkan.github.io/smells/imperative-loops

It suggests using functional loop methods (.map(), .reduce(), .filter()) instead of using imperative loops (for, for in, for each) but completely disregards the facts that imperative loops also have access to the break, continue, and return keywords to improve performance.

For example: If I have an unsorted list of 1000 cars which includes a whole bunch of information per car (e.g. color, year manufactured, etc…), and I want to know if there were any cars were manufactured before the year 1980, I can run an imperative loop through the list and early return true if I find one, and only returning false if I haven’t found one by the end of the list.

If the third car was made in 1977, then I have only iterated through 3 cars to find my answer.

But if I were to try this with only functional loops, I would have to iterate through all 1000 cars before I had my answer.

A website with blind rules like this is going to lead to worse code.

QOI is just a format that’s easy for a programmer to get their head around.

It’s not designed for everyday use and hardware optimization like jpeg-xl is.

You’re most likely to see QOI in homebrewed game engines.

Are you not made primarily of water?

The syntax is only difficult to read in their example.

I fixed their example here: https://programming.dev/comment/12087783

I fixed it for you (markdown tables support padding to make them easy to read):

|markdown|table|
|--------|-----|
|x       |y    |

Chromium had it behind a flag for a while, but if there were security or serious enough performance concerns then it would make sense to remove it and wait for the jpeg-xl encoder/decoder situation to change.

It baffles me that someone large enough hasn’t gone out of their way to make a decoder for chromium.

The video streaming services have done a lot of work to switch users to better formats to reduce their own costs.

If a CDN doesn’t add it to chromium within the next 3 years, I’ll be seriously questioning their judgement.

I’m under the impression that there’s two reasons we don’t have it in chromium yet:

1. Google initially ignored jpeg-xl but then everyone jumped on it and now they feel they have to create a post-hoc justification for not supporting it earlier which is tricky and now they have a sunk cost situation to keep ignoring it
2. Google today was burnt by the webp vulnerability which happened because there was only one decoder library and now they’re waiting for more jpeg-xl libraries which have optimizations (which rules out reference implementations), good support (which rules out libraries by single authors), have proven battle-hardening (which will only happen over time) and are written safely to avoid another webp style vulnerability.

Google already wrote the wuffs language which is specifically designed to handle formats in a fast and safe way but it looks like it only has one dedicated maintainer which means it’s still stuck on a bus factor of 1.

Honestly, Google or Microsoft should just make a team to work on a jpg-xl library in wuffs while adobe should make a team to work on a jpg-xl library in rust/zig.

That way everyone will be happy, we will have two solid implementations, and they’ll both be made focussing on their own features/extensions first so we’ll all have a choice among libraries for different needs (e.g. browser lib focusing on fast decode, creative suite lib for optimised encode).

Who is this article for?

Firstly, it’s basically just a repost of existing info from the mozilla article but now with ads.

Secondly, the puppeteer team left years ago to work on playwright which is now the better product, which also supports firefox through the webdriver-bidi standard…

So now I’m wondering… just who was this article for?

I use git log --graph --all --remotes --oneline whenever I need to shell into another computer, but it’s still too barebones for regular use.

What specifically do you think is legacy in that comparison? The coloring? The horizontal layout? The whitespace?

Note: I’ve changed the first link from https://github.com/cxli233/FriendsDontLetFriends/network to https://github.com/zed-industries/zed/network. Still the same view, but just a different repo to highlight the problems

1. It’s in a small non-responsive box
2. Ridiculous spacing

• If you want to see the commit messages, you either need to hover over a dot which increases visual scanning durations or you need to go to the commits view which only shows the commits on a single branch

3. It doesn’t show commit messages
4. It’s scrolling horizontally
5. Branches cannot be collapsed
6. Branches cannot be hidden/ignored
7. No way to search for commits
8. No way to select multiple commits

• Which also means no way to diff any specific commits together
• And there’s also no way to perform an action over a range of commits
• And there’s also no way to start a merge/merge-request/pull-request/etc… between two commits

9. No way to sort by date/topologically
10. Keyboard controls only moves view instead of selecting commits

I’ll stop here at 10 reasons (or more if you count the dot points), otherwise I’ll be here all day.

The network view lays out forks and their branches, not only [local]/[local+1-remote] branches.

Yes, but the others can do that while still being usable.

I don’t know what IDE that miro screenshot is from. […]

It’s gitkraken

[…] But I see it as wasteful and confusing. The author initials are useless and wasteful, picking away focus. The branch labels are far off from the branch heads. […]

The picture doesn’t do it justice, it’s not a picture, it’s an interactive view.

You can resize things, show/hide columns, filter values in columns to only show commits with certain info (e.g. Ignore all dependabot commits), etc… Here’s an example video.

[…]The coloring seems confusing.

You can customise all that if you want.

The first link is a totally different purpose than the second two.

The first link is going to there because that’s the only graph view that github has.

I’ve got to say, seeing this:

https://github.com/zed-industries/zed/network

instead of something like this:

https://fork.dev/blog/posts/collapsible-graph/

or this:

https://miro.medium.com/v2/resize:fit:4800/format:webp/0*60NIVdYj2f5vETt2.png

feels pretty damn legacy to me.

I’d recommend removing as many variables as possible.

Try getting a single html page to work (no mongoose, no preact, no vite, no tailwind).

If you can’t get that to work, then no amount of tinking in preact/vite/tailwind/mongoose will help you.

Once you have a single page running, you can look at the next steps:

For scripting: try plain js, then js + mongoose, then preact + mongoose. If a step fails, rely on the step before it.

For styling: try plain css, then a micro css framework that doesn’t require a build step (e.g. https://purecss.io/, https://picocss.com/), then tailwind if you really want to try messing around with vite again.

There are some tools/libraries that act as a front-layer over regex.

They basically follow the same logic as ORMs for databases:

1. Get rid of the bottom layer to make some hidden footguns harder to trigger
2. Make the used layer closer to the way the surrounding language is used.

But there’s no common standard, and it’s always language specific.

Personally I think using linters is the best option since it will highlight the footguns and recommend simpler regexes. (e.g. Swapping [0-9] for \d)

At least once every few days while coding, usually to do one of the following:

1. Select multiple things in the same file at the same time without needing to click all over the place

   Normally I use multicursor keyboard shortcuts to select what I want and for the trickier scenarios there are also commands to go through selections one at a time so you can skip certain matches to end up with only what you want.

   But sometimes there are too many false matches that you don’t want to select by hand and that’s where regex comes in handy.

   For instance, finding:

   • parent but not apparent, transparent, parentheses, apparently, transparently
   • test but not latest, fastest, testing, greatest, shortest
   • trie but not entries, retries, countries, retrieve
   • http but not https

   … which can be easily done by searching for a word that doesn’t include a letter immediately before or immediately after: e.g. \Wtest\W.

2. Search for things across all files that come back with too many results that aren’t relevant

   Basically using the same things above.

3. Finding something I already know makes a pattern. Like finding all years: \d{4}, finding all versions: \d+\.\d+\.\d+, finding random things that a linter may have missed such as two empty lines touching each other: \n\s*\n\s*\n, etc…

There’s a whole bunch of pull requests and issues sitting there for a start.

Personally I’d also update the example in the readme and set an engine value in the package.json file.

Post title is misleading as he’s not really the one causing the drama.

it’s simply false to say he’s continuing to cause the drama and problems when all he did was ask to get his commit access back …

No. When he realised he wasn’t immediately given access as he was asking for it he also made a post on the unmoderated reddit board with “Drama” in the title.

He inflamed drama during what should have been an otherwise fairly dull bureaucratic process, tried to hide his earlier posts, was called out on it with a timeline, then eventually half-admitted to creating drama.

… and tell his haters they’re being assholes

Engaging with haters is creating more drama, which makes more disruption, which makes more haters, repeat ad infinitum.

He just needed to ignore them and let the mods do their job, not make their job harder than it already was.

The drama comes from people who just hate the guy and are screaming about letting him back. His response to that was then very cordial and just calling out them for being to aggressive.

It definitely appeared cordial on his part, but the timelines of events comment showed he was cherrypicking and trying to change things after the fact. He was being deceitful and manipulative which of course made everything worse than it needed to be. He drove away more of the community.

All he needed to do was not be disruptive himself, let the mods sort out the initial haters, and let the boring topic of a commit bit be addressed.