Toooo real. Its like companies have taken the worst of everything and just call it agile. List out every task and estimate them so we have timelines, but don’t actually architect anything as that’s waterfall. Fake waterfall, with fake dates, but fingers will be pointed like they were real commitments, and spend a month doing it for this executive power point instead of fucking off so devs can build the damn thing.
Best of luck! Sounds like a cool project.
Not sure if NeoVim uses tree-sitter as the default syntax highlighter, but it will give you Abstract Syntax Tree info if you can jack into it for the document so you don’t have to parse the markdown. Your WYSIWYG view just has to translate the AST which may help with removing style symbols.
One of many ways to tackle I’m sure.
You probably don’t want the entire terminal rendered in your UI for the reason you gave that it is intended for monospace.
Rather, you want the buffer which is markdown and contextual info like cursor position.
You might hit some challenges like how to handle style elements. For example:
<cursor>*bold*
Moving the cursor to the right of the b will take two key presses in nvim but would typically be one key press in a WYSIWYG editor.
There are probably many ways to handle this in nvim through the plugin system, but both paths of embedding vs emulating nvim has a good chunk of dev work to be completed.
Emulating will likely be more rewarding at the start as you can get incremental improvements pretty quickly.
Embedding is a cool idea, but likely a ton of upfront work to get your first tangible results.
You might be interested in reviewing https://github.com/MeanderingProgrammer/render-markdown.nvim which attempts to render Markdown in the terminal. They have logic for rendering things like the bold example in bold while hiding the markup.
I personally just use https://github.com/iamcco/markdown-preview.nvim to render in a different window when render-markdown.nvim isn’t enough.
I’m still wired headphones. I use FiiO JadeAudio KA3 DAC and Letshuoer S12 wired earbuds. Not as impressive as I hoped for the price. Mostly wish it went a touch louder.
Same. Just don’t become too good at it. Now I have to write whitepapers and participate in speaker panels at conferences. Ugh.
Could be the battery. My 5a5g died after 3 years and it was the battery. I couldn’t get it to boot that I could tell even while charging. Didn’t try calling it though to see if it rings.
Sounds odd, but have had similar issues with a Nest cam. Main powered doorbell camera resets when someone rings it until I replaced the battery.
Can’t remember if the 5a5g had a headphone jack (using 7 pro now), but you can kiss that goodbye. Fingerprint reader is in the screen now instead of the rear, but otherwise its been functionally similar.
The 8 line has extended support. If you care about security updates I’d check https://endoflife.date/pixel and pick what’s affordable. (a) models are at the lowest end, followed by the regular 8/9, then pro models for the best hardware.
Graphene also recently added some options like:
Can confirm, it is information they already have. Below is likely the API the telco exposes to the bureau. Each data point queried returns true, false, or a confidence score.
It is intended as an anti-fraud tool. Not saying I agree with it. Something like PGP is sufficient for building out a web-of-trust without needing to share my personal information.
No programming knowledge required.
Graphene only supports Pixels due to the titan chip. The versions with “a” are cheaper. Check when they go end of life to find the cheapest if you care about updates. So probably the 6a or 7a if you want at least 2 years of updates.
Not sure on this one.
The auditor is to make sure you are installing an authentic version of graphene. That it is not a modified version that has been tampered with (e.g., backdoors).
Automatically enables MAC randomization. This can help with being tracked on public networks. Fingerprinting techniques have gotten better though with deep packet inspection and even measuring radio characteristics. I’ve seen demos of two brand new and identical models of iPhones being distinctly picked out due to variances in the radios during manufacturing.
Doesn’t help with advertisers tracking behavior based on IP. VPNs help with “blending-in” by putting multiple users behind the same IP. Provider matters here. Needs to be a VPN provider that won’t just sell your data or cave to law enforcement. Mullvad is my preference. Paid with crypto. RAM only logs. That said, use Tor or I2P for anything you don’t want subpoenaed.
For additional tips:
No. Its all text file config. You wouldn’t use live CD mode. You define your own how you want it to work.
Its a steep learning curve so if looking for off the shelf solutions, don’t use nix. If you need something custom but through a single config paradigm, nix is awesome.
Soap boxing here but I feel these kinds of use cases is what NixOS is built for.
Declarative config to setup the system, users, and apps.
Declarative and customizable impermanence exactly how you want it.
I use Tails as well but NixOS is my daily driver. Anything not marked explicitly to persist is dropped each reboot. I’m the only user so I keep the last 30 days of non persisted data for like a power outage but that’s something I had to go out of my to setup for my use case.
There is anonymity and pseudonymity.
Do you need your opsec to be resistant to state-level actors (oppressive regime, censorship, illegal activities)? Well then you need to make sure you don’t introduce anything that will deanonomize you.
Are you trying to be resistant to mass data collection efforts used for profit? Being on the pseudonymity spectrum is a good step.
Dealing with the latter is like dealing with a bully. Make it not worth their time. They just want to put you in bucket X so they can estimate the most likely way to influence you for reason Y. Pseudonymity is about having multiple aliases that get put into different buckets so their privacy invasive efforts are less effective.
I’m both experienced and know jack shit because there is just too much to learn. I just started using it (1998ish) to make cool looking UIs. Its been my daily driver for 15 years now.
You will never learn it all. Over time you may become more familiar with the terminal or you may not. Doesn’t matter. You do you.
Its pretty easy to test drive. Grab a distros “Live CD” version, put in on a thumb drive, reboot and play around. This wont be persistent. When you’re ready, install it on an external SSD. Play around some more now that your edits will be persistent. You’ll mess up. Take notes. Start again once you’ve hosed your system.
This is why we trust but verify. Thanks mom for teaching me that cruel lesson of unplugging the phone cord to get me to bed (dial up days). It lasted about a week before I caught on you always came up from the basement before bed.
I’m so glad you never noticed I swapped my line with the guest bedroom. Also glad that ancient block in the basement could be hand wired.
For our lower environments we use rsync like the author but skip the pipeline altogether. The servers have a watch script to restart when files are rsynced. We then have a local watch script that rsyncs on file changes.
Relatively instant deploy (2-5s) whenever a file is saved.
Good call on a simulated failure. When I first set it up, it was LVM/BTRFS or ZFS as my top choices. It was a coin toss at the time because I hadn’t built this sort of setup before.
I use immutable nixos installs. Everything to redeploy my OS is tracked in git including most app configurations. The one exception are some GUI apps I’d have to do manually on reinstall.
I have a persistence volume for things like:
I have 30 days (or last 5 minimum) of system rollbacks using BTRFS volumes.
The personal files are backed up hourly to a local server which then backs up nightly to B2 Backblaze using rclone in an encrypted volume using my private keys. The local server has a mishmash of drives in a mirrored LVM setup. While it works well for having mixed drives, I’ll warn I haven’t had a drive failure yet so I’m not sure the difficulty of replacing a drive.
My phone uses the same flow with RoundSync (rclone + GUI).
Git repos are backed up in git.
Logs aren’t backed up. I just persist them for debugging and don’t want them lost after every reboot.
Caches/Games are persisted but not backed up. Nixos uses symlinks and BTRFS to be immutable. That paradigm doesn’t work well for this case. The one exception is a couple game folders are part of my personal files. WoW plugin folder, EvE online layouts, etc.
I used to use Dropbox (with rclone to encrypt). It was $20/mo for 2Tb. It is cheaper on paper. I don’t backup nearly that much. Backblaze started at $1/mo for what I use. I’m now up to $2/mo. It will be a few years before I need to clean up my backups for cost reasons.
The local server is a PC in a case with 8 drive bays plus some NVME drives for fast storage. It has a couple older drives and for the last couple years I typically buy a pair of drives on sale (black Friday, prime day, etc). I have a little over 30TB mirrored, so slightly over 60TB in total. NVME is not counted in that. One NVME is for the system, the others are a caching layer (monero node) or temp storage (transcoding as it also my media server).
I like the case, but if I were to do it again, I’d probably get a rack mountable case.
The DNS is cheap. Something like a penny a day for privacy. I typically paid like $50 every 2-3 years for both renewal and DNS on a couple domains.
Was kind of a PITA to be honest as I remember their login process was a little weird. I eventually moved on when they were slow to adopt some of the newer TLDs.
The registrar owns the domain then, not you. I made a root comment about Njalla which offers this service.
edit: Well you could use fake data. Still risk losing claim to it. I tried doing this with name cheap and they figured it out somehow that the info I gave wasn’t real. Was years ago so I don’t remember what I put in. My guess is it was one of those soft credit lookups (where did you live between X and Y?). Could also be misremembering.
Been using Nix for just over a year.
Seconding to go with flakes. No idea wtf channels are or whatever the previous system was.
Documentation can be confusing due to changes in paradigms. The bare “nix <scope>” seems to be the most modern oppose to “nix-<scope>” (e.g., nix store vs nix-store). That said, not every feature can be found in the newer variants.
This can make following tutorials difficult if they aren’t using the same paradigm.
Getting comfortable with the nix language will be helpful. Its a functional programming language, which is very different than languages like bash.
Not everything has to be done the nix-way. My nvim files are in the same repo, but I just outOfStoreSymlink them instead of wrapping them in a derivation.
Some useful packages I like not already shared.
Disk partitioning: https://github.com/nix-community/disko
Immutable: https://github.com/nix-community/impermanence - Pretty much resets the system to a new install every boot. Discourages manual tweaks via sudo as they get wiped out. You can still mark certain directories to be persistent (logs, personal documents, steam games, etc.).
Nvfetcher: https://github.com/berberman/nvfetcher - Nix has a concept of overlays. You can pretty much override anything with .override (module args or inputs) and .overrideAttrs (module attribute set or outputs). Nvfetcher helps with checking different sources so you can override a packages src attribute. Why is this useful? So you can install any version you want and are not bound to nixpkgs. That doesn’t mean the install script in nixpkgs will always work on newer versions, but those can be overridden as well if needed.
Note that disko, impermanence, and nvfetcher all have a flake.nix in the root of the repo. Those provide ready to go overlays so you don’t have to deal with writing your own which is really nice if you want to latest version without much work when available.