I own the Sovol SV06, it was my first printer but it was also the cheapest option for me ($169 IIRC). The Sovol has given me two problems in the entire time I used it:

1. When it came in, the extruder was jammed. Wouldn’t print or extrude any filament for some reason. Followed a 2 minute video on Sovol’s Amazon page to resolve it (although it did involve disassembling the hotend).

2. The extruder decided to encase itself in plastic one day when I printed something on it. That was a bitch and a half to clean, had to take a heat gun to it to soften the plastic then scrape it off without burning myself. My best guess is it was caused by me forgetting to run bed leveling after moving the printer a bit, hasn’t happened again.

Other than those two times it just works every time I need it. It was sitting dormant for ~3 months and I just kicked off a print yesterday, no problems. Fired right up and everything printed perfectly.

With that said, is it €239 of “Just works”? Probably not. I immediately couldn’t do some prints I planned because of the build volume (although all three of your options have the same build volume). So I’m already considering upgrading to an SV06 Plus. So check some of what you want to print that it’ll fit in 220x220x250.

I did some research on your other options and as far as I can tell, the main difference between them and the Sovol is the all metal hotend and print speed.

Sovol SV06 has an all-metal hotend so you can print high temperature filaments (PETG/TPE/CFN/etc) without worry (does require a harder nozzle most likely though). The other two seem to have some metal but are not fully metal, so if you want to hop into the more exotic materials you’ll have to upgrade those.

Second is speed, my SV06 prints at 80 mm/s. It is slow. Smallest prints take around 2-3 hours. My current print will be done after 24 hours. This is fine for me as most of my prints need complex geometry, so I’d rather it take longer and be accurate than run it too fast. The others claim a max speed of 250mm/s which would be a bit over 3x faster than the Sovol. If they can actually print at that speed without looking awful, that’s a pretty big upgrade time-wise.

If you need exotic filaments and don’t want to upgrade the hotend yourself for it then consider the Sovol. Other than that, the price in your region makes it not an option in my opinion. The Sovol just is a budget printer, only makes sense at budget prices. The Kobra and Ended you mentioned look very similar other than that, they both have auto bed leveling (a must have), same build size, very similar designs. Personally I’d lean towards the Ender, just for the community support. But do some research and see how many community member posts you see online resolved with the two. They seem to be functionally identical to me otherwise (just looking at a spec sheet, I do not have irl experience with either of these printers)

I’ve always gotta wonder where the fuck the dust cover went when I see pictures of people using/holding AKs without them. They aren’t exactly small or something you take off very often, pretty hard to lose

I’ve seen comparisons of the 32GB vs 16GB GPD Win4 and there’s about a 10-15% uplift in performance at the same TDP in a lot of games with the 32GB model.

So it can give an increase in performance, or at the least let you run at a slightly lower TDP for the same performance and a bit better battery life.

Of course this was the 6800U, hard to say if the effects are similar for Intel’s chipset or not.

The not-so-quiet part here is “Homeless or poor people don’t deserve to have their basic need of a toilet met”

They call it a “need” but proudly talk about how they’re taking it away from the less fortunate.

I’ve heard that, but once I tried to refund a game at 3 hours and got nothing but an automated response (denial) everytime I requested a refund.

In this specific case it was actually a game I played 2 hours of during a free weekend approximately 4 years before buying it, played one hour after buying it to see if it had gotten better, decided it hadn’t and refunded it. But Steam counts free weekend playtime towards the refund window…

If there’s any actual way to ensure a human reviews it, that’d be neat. 100% it was automatically denied by some code just checking my playtime and seeing it was past two hours.

No doubt the “next-gen update” is just an excuse to slip in paid mods like they just did with Skyrim

They did some minor hardware revisions and “Slim” models, but yeah they were never intended as a “Pro” model with increased performance/graphics. Definitely not a “tradition” by this point

Not discounted currently (I’m not convinced BF/CM aren’t all fake), but I recently got a Sovol SV06 for ~$209 from Amazon and had seen it at that price for several months, so it’ll probably come back down again.

I had one minor issue but the troubleshooting video on the Amazon page showed me how to fix it, and it’s been printing like a champ with no issues so far. FDM printer (i.e., not resin) with an all metal hotend so it can handle more exotic/stronger filament types. The auto bed leveling is also super great, most Enders don’t come with that and from what I’ve heard bed leveling is a bitch.

Also it’s been my only 3D printer ever so I don’t have much of a reference point except the ones we had in university that were almost always broken. (Or at the least unlevel)

Unless you’re talking about a one-off by a single hobbyist, the aftermarket Deck screen is still LCD, it’s just a higher res and more color accurate. Valve very specifically said the new OLED screen will not be able to just be dropped into the original Deck. Someone might get it to fit but it’d be a lot more involved than just a simple screen replacement.

Oil in your pasta water does literally nothing, just skip it.

Owning a ghost gun is a crime, right?

(Ignoring the fact that “ghost gun” is a meaningless and intentionally emotionally charged term)

In New York, yes. In the vast majority of the US, no. It’s illegal to file the serial number off an existing firearm, but 100% legal in most states to manufacture your own unserialized firearms for personal use. Just cannot be sold/transferred.

I’d note the article you linked says nothing about how many of those are actually 3D printed, it is infinitely easier to deface the serial number on an existing firearm than it is to 3D print one.

Ani.social user chiming in, lovely little instance. No drama and the local page is just cute art and episode discussions (admittedly most of the episode discussions are empty though).

“Holo House” is the farming and fishing minigame. I believe you unlock it once you beat stage 1, it shows up in the main menu as “???” until unlocked.

It was a bug in that version of the distro IIRC, trying to install Steam would instead try to install the SteamOS desktop environment (or something along those lines). It has since been fixed to actually install the Steam client.

Obviously it was a bit silly he typed “Yes, do as I say” after seeing the message, but he was also literally following exactly what all the online guides said to do (other than the “Yes do as I say” part). Luckily it’s fixed now but I do think it was a really good demonstration of what the video wanted to see: “What might the average non-techie gamer face using Linux?”

I feel like it’s 100% a “they don’t care,” the vast majority of social media users couldn’t give less of a shit who runs the service, just what the service does for them.

The average person didn’t quit Facebook because it was a gross invasion of privacy and FB was caught doing plenty of suspect shit - Facebook declined because it wasn’t “cool” anymore and that’s it. People on Lemmy are more likely to care about who’s behind the service, but the average user certainly isn’t going to care much or at all.