It’s known as a beginner-friendly distro, exactly for the reasons you say. There is nothing wrong with using something like that as an intermediate or advanced user if that is what you prefer. You don’t have to go “Well, I have been using Linux for four years now, guess I am an intermediate user so now I have to switch to Arch”

The link is to an Invidious instance, which is an alternative (and private) YouTube frontend. It is showing YouTube-videos. You can click “Watch on YouTube” to be redirected to the official YouTube-video.

Thanks for the write-up! :)

Yeah, I’m OK with the cost of it. I don’t only consider a feature vs. price picture, but also factor in things (like you say) support and longevity/sustainability.

The militant fanboyism surprised me a bit (maybe it shouldn’t have?) - looking at some of the comments below YouTube-reviews was… interesting…

That is what I feared. I tried both my login password and a blank password, and it refuses to open. I’ll wait to see if anyone has previously found a way to magically open it again, but I will probably need to scrap my Signal database and relink my computer without the chat history. It’s a bummer, but not a major issue for me.

Cheers! Saving this reply for when I have got my printer and need to figure out how to do things like this!

Nope.

I’m on CalyxOS with microG, and as far as I know, Android Auto does not work here. I understand this is a deal-breaker for a lot of people, but I have personally never seen Android Auto to be of particular interest, so I am completely fine with it.

Since deleting my Google account early this year (having used it as a primary account for e-mail for about 15 years), I have only stumbled upon two problems. The first one was that an old account I had with my current ISP had tied my phone number and my old e-mail account. This was solved with a call to customer service that severed that link and allowed me to make a new account with my phone number. The second was that I missed an invitation to an alumni party from a previous job… so yeah…

Note, I did spend a significant time overlapping my new primary mail account with the Gmail-account to ensure I had resolved as good as all of these issues. Since moving to Proton, I think I spent 2 years before actually deleting my Google account. That included a fairly thorough cleanup of old accounts that took quite some time and energy (boy, do some of these services give you a hard time deleting old accounts…)

For which services are you sometimes wanting to go back for?

Auto unlock seems to work completely fine with the new wallet I set up. And it tries to unlock the one I am having issues with (called “Default keyring”), but it seems the password just isn’t accepted anymore (whatever it was).

I don’t have any process named kwallet_pam running (only kwalletd6), and could not find anything related to kwallet_pam as an executable at least.

I did an update over the week end, but I am pretty sure I rebooted between then and startup today. It is a long time since I’ve had to force shutdown.

I would have assumed so, but it is not accepted.

Yeah, ideally it would already be out and I could look at some reviews. The timing is such that I want to get one now, and I would hesitate to get a MK4S instead where the Core One seems to better fit my wants. If it was either a brand new company or a printer that somehow revolutionized 3D-printing, I would be more hesitant to order before launch. But seeing as Prusa is an established company, and they are not reinventing the wheel here, I feel more comfortable (even as you say, they are stretching out of their comfort-zone - but isn’t one of their commercial grade printers already core xy?).

I have also thought that the prints where I need more volume would not be solved by an additional cm or two in the xy-plane, and would need to be spliced in some way. How is that process anyway? Do you use a glue gun or a 3D pen to do this splicing? My guess it will not look very pretty, but could I expect to be able to make watertight seals for example?

But I can see them switching focus from consumer machines to “pro-consumer” machines due to the race to the bottom with consumer machines.

Yes, that has been my impression during my research as well.

Thanks! Yes, a good pair of calipers are long overdue in my household. Now I will finally have a reason to measure everything!

Good to hear! Based on the replies here, I feel quite comfortable with this choice now.

That is also my understanding. It has some ventilation in the back that helps with this.

1. What are you looking to get out of the hobby?

In general, I want to build my skill set to include CAD-modelling and printing things that could help me around my home and for other non-helpful, but fun, things. Some examples below. I am not looking at adding this to my professional skill set.

2. What is your tolerance for tinkering? Or in other words, are you willing to learn and fiddle with the machine or would you rather it “just work”?

In general, I would like to tinker some. But I don’t want it to be prohibitively difficult to get started. I am new to this, and am not looking for an incredibly steep learning curve. For instance, I have understood that the Voron might suit my desire for openness more, but my impression is that it would be too much tinkering at this stage.

3. What kinds of things are you looking to print (not necessarily mutually exclusive categories: big things, small details, multi-color, outdoor/ automotive, etc)

The immediate projects I have in mind are cases for various Pi/Pi Pico-based projects. Some indoor climate monitors for instance. There are several other smaller projects I have in mind, which could be for instance some custom mounts for my devices. So not too large things to begin with, and these things are what is most important to me now. But I want a multipurpose printer, that could handle both smaller figurines and larger sculptures also (not that exceeds the print volume of the Core One as of now). I know for instance that miniatures would probably be a lot better with a resin printer, but for now I don’t have a space that is properly ventilated for this. In the future I will consider getting more specialized printers if I find that I need it and have space for it.

4. What’s your budget?

The Core One is in the higher end of what I had envisioned spending on this, but I can go a little higher if necessary