Prusa slicer, partially because I have a mk3s+ but also because I tried to use cura many times but always several minutes into using it, my entire laptop just shuts off, like the power was pulled, no logs written to disk, no error message. It’s the only program to do that and I can’t even report an issue because there’s no logs I can submit. I assume it’s related to taxing my GPU in a way that causes a power related fault.

Watching the video and the head movement all I see is the Balenciaga ai meme

Stuff like this really makes me want to switch to jellyfin, but I watch stuff from me and my friend groups libraries and Plex lets me search for shows across my entire friend group at once. I’m afraid I’ll be waiting forever for jellyfin to allow federating servers so that bob@red.instance can share a library with alice@blue.instance allowing Alice to browse red+blue instance content from their home instance UI instead of requiring an account with every instance.

Sure, most of them are posted here: https://www.printables.com/@StephenSmith

I almost exclusively print functional things so here’s my list of things I’ve designed or printed:

• Tubular key to bypass paying for laundry
• Furniture leg extensions on almost all my furniture to give minimum 4" clearance for the robovac
• Custom mounting bracket / spacer for mounting road sign to the wall with command strips
• Tapestry mounting shim to clamp tapestry in binder clips to hang on the wall without ripping the tapestry
• Rubber band powered sandal holders that stick to the wall and clamp onto sandals which can be used without using your hands / while holding something (I needed to keep my basement sandals from being eaten by my old robovac and I needed to be able to put them on and put them back without needing to put down anything heavy I’m taking to/from the basement, and the space required it to be flat against the wall)
• Replacement shelf pegs for bathroom shelves which are normally only sold in 20 packs for >5$ when I only needed 1, the print cost like 1c instead
• Replacement D-slotted electrical box key since the one that came with the box broke
• Backyard lamp holder that attaches to the fence pole and provides a loop to hang a lamp
• Replacement side panel clip for my PC case which came with 1 broken - manufacturer doesn’t sell replacements
• Custom piece for 2 sectional couch legs to slot into which keeps the 2 halves of my couch from sliding apart causing someone to fall in between onto the floor

Some of this could have been bought online but having a 3D printer really reveals how overpriced plastic stuff is. I rarely print something that costs me more than a few dollars in filament - and that’s if it’s a very large object, it’s easily less than the shipping cost of an equivalent item alone, and small things can often only be found in large packs online while usually costing only a couple cents to print. And plenty of the stuff I print benefits from being able to be made custom and to the exact dimensions I need, for example the furniture leg extensions I made fit perfectly on the furniture legs and raise them up exactly as high as they need to be for my robovac to go under, not a centimeter more. A whiteboard marker caddy I made holds the exact number of markers I have / want to have and attaches under a light switch wall plate which I designed in order to avoid needing to attach it with command strips or screws (it gets clamped between the wall plate and the wall by the existing light switch screws). The first item I listed, the tubular key, was printed with the exact bitting needed for the lock (layer height of 0.05mm is enough vertical resolution for the key to work).

Was also gonna say this since expensive gadgets weren’t excluded. I played a bunch of VR minigolf over pandemic to socialize with my irl friends who I couldn’t hang out with and these days VR has been the center of more than half of the social gatherings at my place where I demo games and we pass the headset around for everyone to try different stuff. Seeing new people try VR for the first time never gets old.

After watching a Jackson galaxy video on how to stop your cat from waking you up early, I followed the advice of never feeding immediately after getting up, and instead doing a certain activity first, like making coffee. After a month of taking a shower before feeding, my cat no longer makes any noise in the morning and only starts getting noisy when I step out of the shower. So thats a good tip for those who can’t free feed. I also started collecting every toy and putting them in a secure box before bed since she has a tendency to chase toys around in the middle of the night and yelp with one in her mouth.

My roborock has been revolutionary for my apartments cleanliness. I’ve had it about 1.5 years and I’ve only emptied the dock’s bag twice (I live in a small apartment). I have the water change kit so it auto refills the docks clean water tank from the laundry hookup and auto empties dirty mop water down the laundry room’s drain. I only have to clean the sensors and rinse the drain screen every 2-3 weeks but otherwise it’s on autopilot on a schedule and my floors are spotless and free of dust and cat fur.

Yeah the ultra dock is amazing, I got the mop dryer and water change kit addons, so it auto refills the clean water tank from my washing machine water line, and auto empties the dirty mop water out a tube I stuck down the washing machine drain. I used to have to refill/empty those water bins every week but now the most frequent maintenance is rinsing out the water filter every 2-3 weeks. Everything else seems to be only required monthly.

Maybe, but only if literally everything else is the same. Otherwise it could just mean that one place is cleaner than another, or that one vacuum has a big bag and needs to be emptied less frequently despite picking up the same amount.

• Roborock bag size is 3L (6"x6"x5"), so think 1 and a half 2L soda bottles, since it doesn’t need to fit inside a handheld vacuum or a moving robot it can be this large. Comparatively, the Matic bag which you can see in the video looks super tiny.
• My apt is ~500 sq feet, so “1 time around the house” isn’t very much
• How many dirtying factors apply to your house?
  • Pets going in and out track in extra dirt, our cat is indoor only and only sheds some fur (I didn’t have the cat when the dock bag lasted a year so we’ll see how that impacts it)
  • Allowing shoes to be worn inside tracks in a lot of dirt - so we don’t allow shoes past the entrance shoe rack
  • Going in and out more times allows more dirt to be tracked in - I work from home so I don’t need to go out every day which greatly reduces the amount of dirt tracked in
  • Living with more people multiplies those many times over, for me it’s just me and my partner
  • Ground floor apartment or elevated - another factor since going up flights of stairs lessens the amount of dirt tracked in. Our apartment is up 3 flights of stairs, so by the time we get to our front door, most mud and dirt has fallen off our shoes. If you live on the ground floor, it’s more likely that dirt and mud can hitch a ride in the treads of your shoes

So it really makes sense that my dock’s bag doesn’t fill up quickly. I can be absolutely sure it works because it produces gray mopping water every time it’s run, and there’s not a speck of dust or cat hair on the floor after it runs. I can check the bin on the robovac after a run and see it 1/3 full of fur and dust, but the bin on the robovac itself is on the small side so once it empties into the dock it seems to barely add much volume - and I suspect that the dock’s vaccum is powerful enough to compact fur and dust into the bag somewhat so it takes up less volume. And that makes sense because the S7 has some of the best pickup performance as rated by vacuum wars on youtube, but I can really stretch the dust bag in the dock both because it’s a whopping 3L bag, because I do everything I can to prevent dirt from being tracked in in the first place, and also because some of the dust is mopped and flushed down the laundry room drain without ever seeing the bag.

Damn that bag must be super small to only last a week. My s7 ultra dock bag lasts around 6 months. Before I started living with a cat I was still using the original bag that had been going on a year and still wasn’t full, vacuuming daily.

Edit: For context, my roborock dock’s bag is 3 liters, so think the volume of 1 and a half 2 liter soda bottles, and the apartment it lasted a year in was ~500 sq ft. The matic’s bag needs to fit inside the robot and looks to be close to the size of the palm of your hand. You can see it at 0:37 in the video on their site.

The ribs are the simplest, at its most basic all you have to do is remove the membrane on the back and then curl it up on a trivet over a cup of water, pressure cook high for 25 minutes and let sit under pressure for 10-25 more minutes after it’s done (depending on how fall-off-the-bone you want, I usually like 25mins), glaze with bbq sauce and broil in the oven until it gets a bit of char.

You can also salt & pepper it before putting it in, use apple cider vinegar instead of water, and/or add a few drops of liquid smoke in the instant pot. But it turns out great even when I forget to do those things so really all you need is ribs and sauce.

I got the recipe from here: https://www.pressurecookrecipes.com/easy-bbq-instant-pot-ribs/

Here’s my favorite recipes, I use it every week:

Ribs - easy to get super consistent results, pressure cooking helps keep moisture in. (https://www.pressurecookrecipes.com/easy-bbq-instant-pot-ribs/)

Clam chowder - creamy New England style, I add extra seasonings to amp it up. The clams I get in cans and bottled clam juice so the only non-shelf-stable ingredients are onions, carrots, celery, and garlic (https://recipes.instantpot.com/recipe/new-england-clam-chowder-2/) My additions: To make it more hearty and thick I do 3 cans of clams instead of 2, 4ish strips of bacon bits, an extra stalk or 2 of celery, between 1.5 and 2 lbs of potatoes instead of 1, and parsley and paprika in the same amounts as the thyme and oregano.

Spaghetti carbonara - my new cook book addition. grating the cheese adds more work, but overall still very simple as far as instant pot recipes go - saute the pancetta and reserve, saute onion and garlic, pressure cook pasta in broth, stir in butter, cream, cheese, egg, and pancetta when done (https://pressureluckcooking.com/instant-pot-spaghetti-carbonara/)

Corn chowder - really similar to the clam chowder but good for if you’re not feeling seafood, like most of the recipes I favorite, the steps mostly amount to dumping all the ingredients in, pressure cooking, and stirring in something extra at the end (in this case cornstarch and half&half to thicken) (https://www.tasteofhome.com/recipes/instant-pot-corn-chowder/)

I also use the instant pot some for other recipes but I lean heavily towards 1 pot meals and stuff where I can get away with putting 90% of the ingredients in for the pressure cooking step, that does mean a lot of soups but I’m working on adding more pasta dishes to my repertoire.

(Edited to add recipe links)

That’s because a robovac enables you to clean super frequently. The marginal cost of vacuuming and mopping with a robovac is 0, so there’s not much reason not to schedule it to run every day (or night if your model is quiet enough) so you can have spotless floors every day. I set mine to run vacuum and mop at 5am every day so I can wake up to freshly mopped floors. There’s no way I would ever want to put in the required amount of daily cleaning to achieve that if I didn’t have a robovac. The dock empties the bin, washes the mop, and refills the water tank through the laundry room water spigot as well as pumps the dirty mopping water out the washing machine drain tube in the wall so it’s fully automated and I only need to rinse the water filter every couple of weeks and change the docks vacuum bag every 6ish months.

If you don’t have any desire to have floors cleaned daily or to automate that then it makes perfect sense to just do a weekly cleaning like you do, but if you want to have 10 hours of cleaning done weekly then a robovac/mop is great for that.

I pay for refrigeration destruction, but that’s about it. It’s strongly verifiable, additional, and as permanent as can be. It’s through wren, which seems to be the most strict about credit quality since they removed all the other projects like cooking stoves and tree planting a while back leaving only refrigeration destruction and biochar, which also seems like a quality credit albeit many times more expensive than refrigeration destruction.

That said I don’t treat carbon credits as offsets, just an additional charity that I do on top of doing my best to be sustainable, reducing, reusing / repairing, and responsibly disposing of things. At the end of the day you can only do so much individually so the only way to do more is to put some of your extra money somewhere that might do a little extra good.

It’s worth noting that if you use privacy for free trials, they limit you to 3 cards linked to the same “merchant” (detected by the first transaction that goes through). After 3 cards you have to contact support to reset the limit for that merchant, so the single transaction cards are only good if you never want to shop there again because they immediately burn 1 use out of the limit.

That’s hilarious, assuming they only regulate prebuilts or full kits, all you’d need to do is something like add everything from a voron parts list to your cart to get around it. I wonder if sellers would also be able to offer partial kits to bypass it too (like offering a frame kit, x axis kit, extruder kit, etc and you just add all to cart)

I just keep a USB c dongle permanently attached to my wired headphones, I forget it’s there. It adds like 1" to the overall cable length. I basically just converted all my wired headphones into USB c headphones.

Roborock or robovac, would be nice to keep up to date on new products and share troubleshooting info with other robovac owners / shoppers, but building that community here isn’t a task I’m up to.

A YouTube video by Rollie Williams, mind you - Holder of a masters degree in climate science and policy from Colombia University.