I can confirm that Hyprland also works from GDM

This might sound a bit heretical, but you could carefully pick and match a variety of software and configuration to your individual needs, turning your tiling wm into a fully functional desktop environment, or you could just install a tiling wm into an existing desktop environment and get something useful with like ten percent of the work.
I know that I have done the former multiple times, only to fall back to existing desktop environments again because it’s just a lot less work and often works better, since you don’t have to take care of getting things like screen sharing or media buttons to function.
Especially LXQt and Xfce make it very easy to run a tiling window manager, but you can also find extensions/plugins for KDE or Gnome to make them tile. I’m personally running Gnome with the Pop Shell extension right now

Damn, who’s cutting onions here ;_;

Also the Apple Pippin. And third-party Macintosh clones. And the Twentieth Century Macintosh. And the Apple III.
Especially before Steve Jobs took over Apple again they had what feels like more flops than successes.

Nennt sich Braindrain. Junge, gut ausgebildete Erwachsene ziehen wohin wo sie bessere wirtschaftliche Aussichten haben. Je nachdem wo sie herkommen können auch politische Probleme und der Mangel an Sozialsystemen ausschlaggebend sein.
Das Phänomen stellt ein großes Problem für die Herkunft dar, weil volkswirtschaftlich die Leute gerade dann, nachdem das Land viel Geld in ihr Aufwachsen und ihre Ausbildung gesteckt hat, wegziehen, wenn sie zu Zahlern werden würden welche GDP und Steuereinnahmen steigern.
Das ganze gibt es international, wo Deutschland ein riesiger Nutznießer ist, aber auch national, so wie von Ost- nach Westdeutschland oder von roten US-Bundesstaaten zu blauen.
Man kann es den einzelnen aber auch nicht übel nehmen, weil sie halt für sich selber nach einer besseren Zukunft streben. Es ist ein schwieriges Problem welches keine einfachen Lösungen hat

Da sag ich mal nur: Ei Gude!

Wohlgemerkt haben die Bauern dieses Jahr im Durchschnitt Rekordprofite eingefahren. Und die Streichung der Subventionen würden sie mittelfristig über höhere Preise weitergeben

“Dammit, for some reason I can’t kill all the children, a few of them always survive, I must have a leak somewhere”

Yeah, if the attacker is in a position to do a MitM attack you have much larger problems than a ssh vulnerability that so far can at most downgrade the encryption of your connection in nearly all cases

You could get an android tablet that can run LineageOS and install that on there without GApps/microg, so without any Google services. That way you can have a Google free tablet that’s also properly optimized for a touch workflow.
If you still want a tablet with a proper GNU/Linux distro you basically have two choices I know of right now: One is the Pinetab 2, it’s not too expensive, but the hardware is a bit limited, both in terms of processing power and display. Software support can also be spotty.
The other would be buying a x86 tablet and installing a regular Linux distro on there. I personally had some luck with the Microsoft Surface tablets, but you can get cheaper ones too. Just check on whether Linux will properly run on it beforehand, especially the cheaper Chinese ones based on Atoms often have driver issues or don’t even boot Linux at all (my biggest enemy on cheap devices: 32bit UEFI with 64bit OS. It’s nearly impossible to boot Linux on those). There’s also the Librem 11 but in my opinion it’s overpriced for the hardware

Thank you for the tip, just registered for one!

I would absolutely love to go there, but I sadly can’t afford a ticket right now

Yeah, I expected oozing and stringing with PETG, but not with PLA. For now I’ve switched back to the regular plated copper nozzle and don’t have anymore problems. The maximum flow rate went down from 40mm²/s to 25mm²/s but I can print a benchy in half an hour, so it’s still plenty fast

Yeah, this is plain PLA though and it prints fine on other printers. Maybe 200°C is too high of a temp

I haven’t used Z-hop yet, due to some bad experiences with older printers, but I might have to give that a try

Already ran through all the flow rate, pressure advance, retraction towers and maximum flow rate calibrations in Orca Slicer

Yeah, I should probably try it with a lower temperature, also got some PLA Meta filament in the post that might help