Abs needs an enclose vented to the outside, or really good ventilation. The ‘S’ in ABS stands for styrene, a fairly potent carcinogen and irritant. Do NOT print it in your living area as it off gasses while printing.

All other plastics you can print on the A1 will be safer.

I’ve printed plenty of different mid density tpu’s including random no name ones with generic profiles, using the Prusa Mini with its Bowden tube. It’s not always a no no.

My wife and I shower together, someone is getting out sopping wet because either the other one is still going or there’s just not enough room to both dry in the shower. Heated floor dries the bath mat just as well as the towel rail anyway

It’s more about pressure than airflow. You just need negative pressure inside the chamber, so gas escapes into your chamber through the cracks, and out the vent.

I have my prusa connected to my WiFi, but it only serves up a Web page with limited control locally. You can only upload gcode, and start a print if the printer is ready to start. And it’s open source so I’d expect the community to have found any issues.

You should monitor it’s connections at the firewall and see if it’s trying to make ANY connections outside your network, no reason for it to try making any dns queries even.

It’s pure oxygen https://skybrary.aero/articles/aircraft-oxygen-systems

I prefer a 20db cut that’s flat across frequencys. Most audio engineer plugs like the etymotic range aim for that midpoint.

If I’m chainsawing, it’s big muffling 30db cut earmuffs.

I’ve been using these for years for concerts, gym classes and always take spares to festivals to give to friends. They are designed for an even 20db cut when listening to music. They have the same fit as the cheaper ER20 but the xs have clearer top end.

I use them 3x a week and have a few pairs. They don’t last forever as the baffles get softer over time. At $40 they last me a year which is pretty good value.

If he’s caught the lessons of how will help the dozens of copycats

I’ll just take a little nibble, but I’ll make loud “OM, NOM, NOM” noises while doing it.

About 9.

Add motor racing having Stewards who make the decisions.

Sure sure, next you’ll say birds are real!

Shooting a gun is very rarely legal here. Boners are better than gun Boners

Fucking is legal, selling is legal. Why isn’t selling fucking legal?

(in your country, it’s fine here in NZ)

You make a good point, and it’s really the reason I have and like Prusa printers. But I do look with some envy at the bang for the buck you get with Bambu

Isn’t there a group working on open source firmware? https://hackaday.com/2024/01/09/x1plus-open-source-bambu-lab-x1-firmware/

So if they are forced to remove something, it can be re-added

Have access to a quarter million dollar scanner from about 15 years ago. It still beats the pants off anything cheaper than 8 grand these days.

You pay for software that can handle millions of points, hardware that can stream a lot of points to the pc. A wide dynamic range to scan, nice matte white, chrome or dark black objects. And raw precision to cast and track very fine details

Before consuming Bug Powder Dust, read or watch Naked Lunch to know what you are in for

It’s also one of the most abundant elements in the universe