Almost every one of the fingerprint sensors in laptops are not supported by Linux due to proprietary protocols. Never managed to get stuff used by Dell or HP with Linux.
But the Grow R503 can be used over uart, what can be connected to usb with some minor additional parts.
Yes, it would be unfortunate for a new user to experience all the horror our distinguished friend EvilSocket is telling everyone today…
Keep up the good work!
Did you uninstall cups and avahi?
Ender. Happened back in the days with a 3v2, the stepper drivers on the original mainboard overheat, causing it to ‘miss’ steps.
Replaced the MB with an improved version, tuned the vRef and never had any issues again.
You might look into tuning the vRef for your machine.
This is just the beginning…
Cars.
You get it…
That is not how it is supposed to look, the end result should be at least a couple of inches wide.
Maybe you don’t need to ‘fix’ your retraction settings?
If it looks good enough, why bother?
Wasn’t aware of the test (SuperSlicer user here), and found this.
The tower has multiple notches, each one corresponding to a different retraction length. By looking at the tower after printing, you can see how each retraction length affects the print quality.
So check your surface finish and select the retraction value with the best looks.
Esp32Cam with esphome running a webserver, add frigate in the mix and you can have dozens of cameras for just a few bucks.
Completely open source (apart from the espressif wifi radio stack, but who’s counting) and low cost.
Yes, quality of the camera will never compete with commercial stuff, but this is way more fun. Add as much cameras as your frigate instance allows…
Gonna recommend this to all my co workers.
It is not vulnerable to Windows viruses.
:-)
Blowtorch will heat this up way too hot.
Try to get it to a high enough temperature to insert filament to do a cold pull and repeat…
Electrical heat gun (paint stripper) is hot enough. Gas based torches will change the stiffness of your material and you will regret it.
https://tukaani.org/xz-backdoor/
Check the links on that page.
Thanks for the pointer.
This is really huge, but people don’t quite understand that yet.
If this wasn’t caught, every system -running public sshd- could be hacked or abused/misused.
And I completely agree with the last words, corporate should pay foss projects!
Depending on the size, but I’ve had success with super glue and baking soda.
https://www.instructables.com/Baking-Soda-Reinforcing-Glue-Repair/
Ender 3v2 as starter here, doubled the price with a lot of upgrades/modifications. Got it running rock solid with Klipper and a microswiss direct drive.
Grabbed the piggy bank and am now really satisfied with my voron 2.4.
But very pleased with the fact I started with the Ender and got to learn then basics.
As far as I can suggest anything; start with something with a large installed base, so it will be easy to find answers or (hardware) solutions to your problems. I can tell you, the installed base for Ender is large, but the quality of the hardware, is what you pay. And they are cheap…
Totally agree. People using cli are probably more skilled and their knowledge has been fed into these ai models.
So we will all end up with some mediocre level of knowledge, because the next input for the LLM 's will be more of the some old stuff. Flattening the curve and less innovation and smart ideas.
These kind of “solutions” are for a non existing problem. Looking at the investors, this is only about making money.
I mis understood, sms is pretty much history over here, so I considered you where looking for some way of sending messages to your phone.
Pushover supports a simple api, which can be used with curl. A la: https://support.pushover.net/i44-example-code-and-pushover-libraries#unix
Does https://pushover.net/ work for you? Been using it for several years, works really well and can be used in several applications.
Or some minor scripting with curl.
Yes, as an alternative to klipper -this really is your end goal - use the firmware by mriscoc, it is really nice and robust.
Gives you more options and the results are better than the stock fw.