I’m setting up FDE and wonders which one is better. “LVM over LUKS” or “LUKS over LVM”? Or something else? Does one is definitely better then the other? What are your preference?

Thanks.

  • TMP_NKcYUEoM7kXg4qYe@lemmy.world
    link
    fedilink
    arrow-up
    1
    arrow-down
    1
    ·
    edit-2
    10 months ago

    If an attacker has physical access to your device, you should not use the device afterwards, ever. There are some mitigations like Secure Boot and Heads OS, but they only slow down the attacker. Given enough time, you cannot stop him. Heads OS is pretty much for giving your laptop to airport security temporary and Secure Boot has been hacked in a minute. Although that was using TMP outside of the CPU, I would not trust Secure Boot with TMP 2.0 for anything other than a quick customs check either.

    Using FDE as a protection against physical attacks is just a false sense of security. Veracrypt for example go as far as to say that secure boot is false sense of security.

    For maximum paranoia there is a use for FDE, though. If you install a crappy app that saves data outside of RAM, /home, /var and /tmp, the data won’t get leaked. Though that would be a massive security issue because most linux computers are servers which cannot use FDE.

    • koper@feddit.nl
      link
      fedilink
      arrow-up
      1
      ·
      edit-2
      10 months ago

      The most common physical attacks will be you misplacing your device or some friend/burglar/cop taking it. FDE works great in those scenarios.

      • TMP_NKcYUEoM7kXg4qYe@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        10 months ago

        Not really, rewriting the boot sector with your malware can be scripted so even the average burglar could use it. Using a previously stolen laptop without reflashing the firmware or something similar isn’t worth the risk imo.

    • umami_wasabi@lemmy.mlOP
      link
      fedilink
      arrow-up
      1
      ·
      edit-2
      10 months ago

      For secure boot bypasses I could only find BlackLotus is the only one capable to do this. I would like to have more details to support the claim “Secure Boot has been hacked in a minute.” Also, I would like the explanation on secure boot is a false sense of security and points to suport such claim as BlackLotus is the only publicly known malware to bypass secure boot.

      However, I do firmly believe that there ia no reason that servers can’t use FDE as they are no differ than other typical computer.

      EDIT: forgot the “boot” for secure boot

      • TMP_NKcYUEoM7kXg4qYe@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        10 months ago

        The secure boot vulnerability was shown on a lenovo laptop. I’ve found https://www.welivesecurity.com/2022/04/19/when-secure-isnt-secure-uefi-vulnerabilities-lenovo-consumer-laptops/, but I’m not sure whether it’s the same thing I was talking about. The attack abused the fact that the TPM chip was outside the CPU so it was possible to read the keys in plain text by just putting a clip on the chip. The laptops in the ESET article seem fairly new so I would expect them to have TPM inside the CPU.

        I recommend reading “threat model” page on Heads OS’ website. Secure boot can be disabled in the UEFI settings which can be accessed by unplugging the CMOS battery to reset the UEFI password. Undoing a few screws takes a few seconds so the bottleneck would be how fast you can upload your fake login screen onto the drive.

        Servers can use FDE obviously but using them becomes highly inconvenient if you enable that. In order to boot you need to decrypt the drive but how are going to connect to the server if it hasn’t booted yet? One solution is to only boot the server when you have local access. The issue rises when your server crashes. Alternatively you can either start sshd early in the boot process at which point it isn’t really FDE or have some kind of KVM which just shifts the issue to a different device.

      • NaN@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        10 months ago

        I think people tend to get hung up on where you store the key material for a server. Hardware token and TPM being two options that are less secure, but network bound disk encryption is supported as well as a combination. So you could have it require the network key as well as the matching PCRs from the TPM for the proper software load before it will unseal.

          • NaN@lemmy.sdf.org
            link
            fedilink
            English
            arrow-up
            1
            ·
            10 months ago

            If I steal the server I have the token, unless someone is physically going to unlock the server every time you reboot which is not realistic.

      • Max-P@lemmy.max-p.me
        link
        fedilink
        arrow-up
        1
        ·
        10 months ago

        TPM has been bypassed. Researches found a lot of laptops where you can just attach wires to the TPM communication lines and you can just listen and wait for the TPM to spit out the key.

        It’s a hardware attack so game over. But still worth doing especially on servers and desktops because then it’s still much more of a skilled attack than someone just stealing the drives. Especially servers with their front drive bays you can literally just pop the drive. And if the drive dies and you can’t erase it, it’s fine, you can throw it away and not care because it’s FDE so you can just throw away the keys.